EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- New Items
New Items
RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver
Product Price: Rs 2,165 / PieceGet Best Price
Product Brochure
Product Details:
| Display Type | Digital |
| Usage | for Communication Systems |
| Color | Black |
| Playback Enabled Over | Bluetooth |
| Remote Control Included | Yes |
The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.
The RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing.
The RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone.
Due to the low-latency and high-refresh-rate RF module, the RP1 and RP2 are ideal for FPV races or Long Range. Suitable for many models due to the ultra-light and Nano size, these receivers can fit just about anywhere!
- Improved PCB design is better for heat dissipation.
- LED on the top side of PCB.
- Solder pads are improved and easier to solder to.
- Built-in a TCXO (temperature compensated crystal oscillator)
- Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
- Firmware Version: ExpressLRS v2.4 pre-installed
- FW Target: RadioMaster RP1/2 2400 RX
- Maximum receive refresh rate: 500Hz/F1000Hz
- Minimum receiver refresh rate: 25Hz
Yes! I am InterestedRequest A Callback
Pixhawk Passive Buzzer and Switch
Product Price: Rs 495 / PieceGet Best Price
Product Brochure
Pixhawk Passive Buzzer and Switch buzzer have two main products one is the passive buzzer and the other is Flight Controller E-Switch. The Passive buzzer has a JST-SH connector on one side that plugs directly into the Pixhawk.
Once connected you will be able to hear different sounds that relate to different modes!
The Pixhawk Flight Controller E-Switch Module enables you to arm/disarm your board at a moment’s notice. This comes with a three-position JST-SH connector.
Yes! I am InterestedRequest A Callback
DM002 with Camera
Product Price: Rs 2,600 / PieceGet Best Price
Product Brochure
Product Details:
| Camera Resolution | 16 MP |
| Video Resolution | Full HD |
| Flight Time | 47 minutes |
When you are done putting the DM002 drone making kit together, you’ll have an excellent quadcopter that is fun to fly. You’ll be hard-pressed to find a more inexpensive drone for aerial photography that performs as well as the DM002HW. The DM002HW is a quick and nimble quadcopter that is fairly easy to fly.
It has three different speeds making it easy to learn in slow mode, and when you get comfortable you can bump it up to medium and when you are feeling ready go full speed in high mode. The DM002HW will also flip with the push of a button.
WIFI FPV / ascend/descend/forward / backward / side flying / Slow/Medium/High speed / turn round / 360°rolling action / 360° accurate localization / LED / One key return.
Check out our collection of high-quality parts of drone
Unleash Your Inner Pilot with Our DIY Drone Kit With Camera and WIFIAre you ready for a thrilling adventure into the world of drones? Look no further than our DM002 DIY mini drone kit with WiFi and Camera, designed for both beginners and enthusiasts alike! With this kit, you'll experience the joy of building your very own drone and taking to the skies in no time.
Soar High with WiFi FPV and Capture Breathtaking MomentsGet ready to experience flying like never before with the WiFi FPV feature! Transmit live images directly to your phone and witness the world from a bird's-eye view. Whether you're exploring picturesque landscapes or capturing stunning aerial shots, the possibilities are endless with our kit.
Comparison:| Specification | DM002 | DM002HW |
| Speed control | Yes | Yes |
| Wifi FPV Camera | No | Yes |
| Wifi connection | No | Yes |
| Colorful LED's | Yes | Yes |
| Smartphone control | No | Yes |
| Altitude Hold | Yes | Yes |
| headless mode | Yes | Yes |
| One key taking off | Yes | Yes |
| One key landing | Yes | Yes |
| Gyroscope | 6-axis | 6-axis |
| 360 degree flip | Yes | Yes |
| Auto Home | Yes | Yes |
| Battery | 3.7V 300mAh Lipo Battery | 3.7V 300mAh Lipo Battery |
| Charging Time | 60-80 minutes | 60-80 minutes |
| Frequency | 2.4Ghz | 2.4Ghz |
| Flight time | around 7 minutes | around 7 minutes |
| Operating environment | Indoor and outdoor | Operating environment |
| Assembly guide | Included | Included |
| Assembly tools | Included | Included |
Yes! I am InterestedRequest A Callback
KK 2.1.5 MULTIROTOR FLIGHT CONTROL BOARD FOR DRONE
Product Price: Rs 4,050 / PieceGet Best Price
Product Brochure
Product Details:
| Speed At Rated Load | 8.4 in/min |
| Voltage | 230 V AC |
| Pressure | Medium Pressure |
KK2.15 LCD Flight Controller – Empower Your Multirotor Adventures
Unleash the true potential of your quadcopter with the KK2.15 LCD Flight Controller. Designed for precision and reliability, this compact yet powerful board revolutionizes your multirotor flying experience. Whether you're a seasoned pilot or just starting, the KK2.15 offers unparalleled control and stability for your F450, F550, S500, or similar quadcopters.
Experience the Difference:- Effortless Setup with LCD Display: The intuitive LCD screen simplifies configuration and provides real-time feedback, making it easy to adjust settings mid-flight.
- Smooth and Responsive Flight: The integrated 6050MPU Gyro/Acc delivers exceptional sensor fusion, ensuring your quadcopter reacts instantly to your commands.
- Auto-Level for Stability: Maintain a level flight effortlessly, even in challenging conditions, with the built-in auto-level function.
- Versatile Power Options: The wide input voltage range (4.8-6.0V) accommodates various power sources, allowing you to customize your setup.
- Customizable Control: Connect to your computer via the standard AVR interface to fine-tune parameters and personalize your flight experience.
- Lightweight and Efficient: Weighing just 21 grams, the KK2.15 minimizes the impact on your quadcopter's weight, maximizing agility and flight time.
The KK2.15 is more than just a flight controller; it's an investment in your passion for multirotor flying. Discover the joy of effortless control, enhanced stability, and the freedom to explore the skies with confidence.
Yes! I am InterestedRequest A Callback
Pixhawk I2C Port Expand Board with Cable
Product Price: Rs 220 / PieceGet Best Price
Product Brochure
The Pixhawk I2C port Expand Board with cable I2C splitter expands the I2C port to allow up to four additional peripheral connections for Pixhawk.
Use the 4-wire cable to connect the I2C splitter and add a compass module, external LED, digital airspeed sensor, or other peripherals to your vehicle. It is a useful tool and very convenient to connect.
Pixhawk/APM flight control only one I2C interface, such as the need to connect more than one I2C peripheral, you can use the line board; Pixhawk – I2C points line board with five completely parallel vertical 1.25 4 a socket, convenient connection in the form of 1 drag 4 four I2C peripherals, for example, at the same time use the external compass and RGB modules. I2C line board and Pixhawk flight control the appearance of the connection
Yes! I am InterestedRequest A Callback