EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- Led Display
Led Display
We are a leading Wholesale Trader of 4 digit 7 segment display module from Pune, India.
4 Digit 7 Segment Display Module
Product Price: Rs 45 / PieceGet Best Price
Product Brochure
Product Details:
| Pixel Pitch | 6 mm |
| Input Current | 30mA |
| Dimensions | 19mm x 50mm x 14mm |
| Weight | 15 grams |
| Driver Chip | MAX7219 |
| Input Voltage | 3.7 - 5.3V |
The TM1637 4 digit 7 Segment LED Display is a low-cost solution for displaying Arduino project output data. Though the data displayed is limited to numbers, users can also display characters such as A, B, C, and so on. The TM1637 Driver Chip controls the 4 digits on this 7 segment display. This TM1637 4 Bits Digital Tube LED Display Module can be controlled with just two wires.
Also, thanks to the I2C Bus, you can control it with only two wires, freeing up more pins on your Microcontroller for other purposes. The module is a 12-foot clock with four common anode tube (0.36 inch) display module for driver IC TM1637, with only two signal lines allowing the MCU to control four 7-segment digital tubes.
If you want to use this 4 digit 7 segment display module in your Arduino project, for that you will need few essential components like
- jumper wires
- breadboard
- batteries or power supply
TM1637 4 Digit 7 Segment LED Display pin Diagram
Pinout:| 1 | CLK | Clock Input Pin |
| 2 | DIO | Data Input/Output Pin |
| 3 | VCC | 3.3V to 5V power supply Pin |
| 4 | GND | Ground Pin |
- Can use as a 4-digit display unit.
- Can use as a clock display
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 1 x TM1637 4 Digit 7 Segment LED Display
| Model | TM1637 |
| Driver Chip | MAX7219 |
| Number of Digit | 4 |
| Input Current | 30mA |
| Input Voltage | 3.7 - 5.3V |
| Dimensions | 19mm x 50mm x 14mm |
| Weight | 15 grams |
Yes! I am InterestedRequest A Callback